Wiring harness fits Fender USA Eric Johnson Stratocaster 300k CTS vol .1uF cap

Description

BEFORE
BIDDING
make sure to READ
all text below, look at all the pictures, and review
shipping costs and return polic
y.
We ship FAST!
Thank
you!
"Vintage Relic pre-wired upgrade wiring kit fits
Fender
Eric Johnson
Stratocaster
. New. This is the best and most economical way to improve the tone of your Strat!
"Eric Johnson" Strat wiring (tone for neck and bridge pickup only).
Wired
exactly
to specs of the Eric Johnson Strat. Full wiring diagram included.
Pickup Switching
:
5-Position Blade: Position 1. Bridge Pickup, Position 2. Bridge and Middle Pickup, Position 3. Middle Pickup, Position 4. Middle and Neck Pickup, Position 5. Neck Pickup
Controls
:
Master Volume, Tone 1. (Neck Pickup), Tone 2. (Bridge Pickup)
3 CTS split shaft pots (300k volume, 250k tone)
5-way control switch
.
Ships with a white
plastic switch tip
.
.1uF ceramic disc tone capacitor.
All cloth vintage style 22 ga push back wire.
Mounted on a Fender aluminum control shield
(Fender P.N. 001-9640-000).
Reduces unwanted noise/60 cycle hum.
Ground wire soldered to the volume pot."
Fits Fender USA vintage spec guitars. May fit other guitars, but please ASK before purchase. The USA CTS pots require a 3/8" hole in pickguard, etc. Distance between the components (center to center); if you need different spacing, let us know:
switch to volume = 2.0"
volume to tone 1 = 1.75"
tone 1 to tone 2 = 1.75"
Above text and pictures copyright Vintage Relic. All rights reserved.
Pot specs:
Tolerance = +/- 10%
Can Size = 15/16 in. radius X 3/8 in. height
Bushing Threads = 3/8-32
Bushing Height = 3/8 in.
Shaft Type - split
Shaft Diameter = .238 in (6.3mm)
Spline Count = 24 (NOT metric)
Shaft Length - 3/8 in.
Hole size requirement = 3/8 in.